9 Best TV Wall Mounts of 2026

Echogear EGLF2 is the full motion mount most buyers should start with, because it covers 42 to 90 inch TVs for $114.99. Echogear rates it for screens up to 125 lbs, lists 22 inches of extension and a 2.40 inch profile when the arm is folded back, and gives 130 degrees of swivel with 15 degrees of downward tilt and 5 degrees up. The plate takes VESA patterns from 200 x 100 to 600 x 400, which covers most current 55 to 85 inch TVs, and it allows plus or minus 3 degrees of leveling after the TV is hung. Echogear says it installs on 16 and 24 inch studs with all hardware included. The trade-offs are a weight limit below the Perlesmith and ONKRON mounts and no warranty length on the product page. We compared documented specs and published prices; we did not install the mount ourselves.

Kanto PDX650 is the full motion mount for people who want the TV to look close to flat when it is pushed back. Kanto lists a 2 inch folded depth, 21.7 inches of extension, and support for 40 to 90 inch TVs up to 125 lbs with VESA patterns from 100 x 100 to 600 x 400. It swivels up to 80 degrees in either direction depending on TV size and tilts from plus 15 to minus 3 degrees, so it suits eye-level mounting more than high mounting. The box includes hardware for wood studs and concrete, a paper template for marking pilot holes and lag bolt covers, and Kanto backs it with a 5-year warranty. The catch is the 22 inch wall plate, which accepts dual studs only up to 16 inch spacing. At $179.99 on Kanto's store it costs more than the Echogear for the same weight rating. We compared documented specs and published prices only.

SANUS VLF828 is the mount to buy when the TV on it cost more than the furniture under it. SANUS lists it for 42 to 90 inch TVs up to 125 lbs, with depth from 2.42 to 28.00 inches, 5 degrees of upward and 15 degrees of downward tilt, and 46 degrees of swivel in each direction. The feature that sets it apart is Shift, which lets you raise or lower the TV by up to 8 inches after it is hung, useful when a soundbar or an outlet ends up in the way. A lower handle helps move a large screen, and FollowThru cable management runs cords inside the arm. SANUS says the mount is UL listed and carries a 10-year limited warranty. At $429.99 on SANUS.com it is the most expensive mount here, and its weight limit is no higher than the $114.99 Echogear. We compared documented specs and published prices only.

Echogear EGLT3 is the cheapest sensible way to put a large TV on the wall when you sit straight in front of it. Echogear lists it for 40 to 90 inch TVs, with a 2.3 inch depth from the wall and up to 10 degrees of tilt that needs no tools, which helps cut glare or angle a TV mounted above a fireplace. The wall plate spans more than 24 inches, so it can reach studs that are not centered behind the TV, and you can level the TV after it is hung. VESA support runs from 200 x 100 to 600 x 400. Echogear says it is UL certified and installs in 3 steps in under 20 minutes. Note that the page states 135 lbs in its spec list and 125 lbs elsewhere, so plan on the lower figure. At $39.99 it costs about a third of the EGLF2, but it cannot swivel or pull out. We compared documented specs and published prices only.

Perlesmith PSXFK1 is the value pick for big, heavy screens. Perlesmith rates it for 50 to 90 inch TVs up to 165 lbs, 40 lbs more than the Echogear, Kanto and SANUS mounts, and its plate adjusts from 200 x 100 to 800 x 400 VESA, wide enough for TVs whose holes sit far apart. It extends from 3.07 to 23.62 inches, tilts 5 degrees up and 15 degrees down, and swivels up to 60 degrees each way, with Perlesmith noting that the maximum swivel depends on TV size. Front end caps reinforce stability, and you can level the TV by 3 degrees after installation. Perlesmith includes standard mounting hardware and a 5-year limited warranty with U.S.-based customer service. It costs $132.99 on Perlesmith.com. The limits are a 50 inch minimum and a thicker folded depth than the Kanto. We compared documented specs and published prices only.

Vogel's COMFORT TVM 3445 is built for medium TVs in busy homes. Vogel's lists the M size for 32 to 65 inch TVs up to 25 kg, which is about 55 lbs, and says long 58 cm arms let the TV turn up to 180 degrees so it can face almost any corner of a room. OneFinger Movement is meant to let you rotate the screen by hand, the TiltAnchor system locks and releases tilt, and you can keep the TV level both horizontally and vertically. Cable clips are included. Vogel's describes the COMFORT series as developed for years of intensive use and gives it a 10-year warranty, and the company says its products are TÜV certified. On the Vogel's US store the TVM 3445 cost $189.99 when we checked. The weight and size limits are low, so owners of 75 inch and larger TVs should look at the L size or another mount. We compared documented specs and published prices only.

ONKRON M7L is the mount to pick when the TV has to come a long way off the wall, for example to clear a cabinet or face a corner seat. ONKRON lists it for 42 to 90 inch TVs up to 143 lbs, with extension from 3 3/8 to 42 3/4 inches, which is far more reach than the 22 to 28 inches of the other full motion mounts here. It tilts 5 degrees up and 12 degrees down and has a 180 degree rotation range. ONKRON says it is for concrete, brick and solid wood walls, and its specification table lists a 5-year warranty. The M7L was in stock at $129.99 on ONKRON.us when we checked, but many other ONKRON tilting and full motion mounts showed Sold Out, so availability across the range is patchy. If you do not need the long arm, the Echogear EGLF2 costs less and is easier to find. We compared documented specs and published prices only.

Mounting Dream MD2380 is the cheapest full motion option here with a price we could confirm on the maker's own site. Mounting Dream lists it for 32 to 70 inch LED, OLED and 4K TVs up to 110 lbs, with VESA patterns up to 400 x 400, 5 degrees of upward and 15 degrees of downward tilt, and swivel to point the TV at your seat. That covers most 50 to 65 inch TVs sold today. It must go on wood studs, solid concrete or brick, and Mounting Dream warns not to mount it on drywall alone. The product page does not list the extension length or warranty term, so it gives less detail than the Echogear, Kanto or Perlesmith pages. At $49.99 it costs less than half of the Echogear EGLF2, which is the better buy if your TV is larger than 70 inches or uses a wider VESA pattern. We compared documented specs and published prices only.

Amazon Basics Full Motion Articulating TV Wall Mount is a simple single-stud arm for small and midsize screens. Amazon's listing says it is designed for TVs up to 80 lbs and 26 to 55 inches, for VESA patterns from 3.9 x 3.9 inches through 15.7 x 15.7 inches, with tilt from plus 10 to minus 5 degrees, and that it suits concrete, brick and wood stud walls with a single stud. That makes it useful where only one stud sits behind the spot you want, such as beside a window or in a kitchen. Amazon showed us prices in Polish zloty, so we could not confirm a US dollar price and have marked it pending; check Amazon.com for the current price. With a 55 inch ceiling it is not a choice for most living room TVs, where the Mounting Dream MD2380 or Echogear EGLF2 fit larger screens. We compared documented specs only and did not test the mount.